4Runner Overland Rear Bumper
4Runner Overland Rear Bumper
Collection of thirteen digital renderings showing a number of the different configurations that the C4 Fabrications rear bumper for the 5th Generation 4Runner can be set up with.
Low-angle quartering view of the C4 Fabrications rear bumper for 2010-2024 4Runners equipped with dual swing-outs for spare tire and accessories.
4Runner parked along a city street and equipped with a C4 Fabrications steel rear bumper with dual swing-outs for spare tire, high-lift jack, MaxTrax, RotoPax and a relocated license plate.
Side view of the C4 Fabrications rear bumper for the 5th Gen 4Runner, along with a hatch ladder, MaxTrax and its spare tire all on a grey 4Runner in snow-bound terrain.
Grey 4Runner equipped with the C4 Fabrications hatch ladder and rear bumper with half-width spare tire swing-out.
Rear view of a 4Runner equipped with the C4 dual swing-out rear bumper.
Grey 4Runner driving a mountain trail in the snow, equipped with a rooftop tent, awning, GMRS radio antenna and the C4 Fabrications steel rear bumper with dual swing-outs.
Ice-encrusted view of the dual closures used on C4 Fabrication's dual swing rear bumper, with a 90-degree latch on top and the all-aluminum tension latch on the bottom.
Black 4Runner on a beach equipped with the C4 fabricated steel rear bumper with dual swing-outs holding a spare tire on the passenger side and RotoPax, MaxTrax and a high-lift jack on the driver's side.
Maroon 4Runner with Rooftop Tent, sliders and the C4 Fabrications rear bumper with tire swingout.
Maroon 4Runner offroading in the mountains with a rear tire fully stuffed into the wheelwell, showing off the C4 Fabrications rear bumper with full-width single swing-out tire carrier.
Maroon 4Runner at a mountain overlook with a rooftop tent, sliders and the Overland Rear Bumper with full-width single swing from C4 Fabrications.
4Runner on a dirt trail in the mountains equipped with an awning, roof rack and the C4 Overland Rear Bumper.
Passenger side rear view of the Overland rear bumper for the 4Runner from C4 Fabrications, showing off its half-width spare tire swing option.
Grey 4Runner with the C4 Overland Rear Bumper installed with half-width single swing-out for its spare tire.
Close-up view of the C4 logo on the 4Runner rear bumper.
Rear view of a well-modified 5th Generation 4Runner that shows off the C4 Fabrications Overland Rear Bumper with dual swing-outs for its oversized spare tire and accessories.
Low-angle view of the C4 rear bumper for the 5th Gen 4Runner showing a Baja Designs S2 Sport flush-mount LED light mounted to aid visibility at night.
Close-up view showing the gas strut on the C4 swing-out bumper.
Close-up of the hitch on the C4 bumper for the 5th Gen 4Runner.
Close-up view of the heavy duty latch used on all C4 swing-out bumpers as well as the anti-rattle pads that serve as the contact point between the swing-out and the bumper.
Close-up view of the adjustable-tension latch for the C4 dual swing rear bumper that helps tie the top of both swinging assemblies together.
Close-up view of the MaxTrax mount for the C4 4Runner rear bumper.
Side view of the fold-down table integrated into the swing-out on the 4Runner rear bumper made by C4 Fabrications.
Close-up view of the fold-down table integrated into the tire-side swing of the C4 fabricated rear bumper for the Toyota 4Runner.
Close up photo showing the high-lift jack mount for the C4 Fabrications rear bumper.

C4 Fabrication

4Runner Overland Series Rear Bumper / 5th Gen / 2010-2024

SKU: 1100-4110-NS
From $2,499.00
Choose FINISH:

No Selection

Choose SWING ARM OPTIONS:

No Selection

100% American Made

Innovative Designs

Premium Customer Service

Free Shipping Sitewide
4Runner Overland Series Rear Bumper / 5th Gen / 2010-2024
From $2,499.00

Features

  • When the bolt-on hitch is removed, this is the highest clearance available of any rear bumper for 5th Gen 4Runner.
  • Multiple Accessory Mounting Configurations available via Mounting Hole Patterns
  • Designed with Extra Bracing to Greatly Reduce Bumper Twist when Swing-Outs are Open
  • Anti-Rattle, Heavy Duty Swing-Out Latching System
  • Swing-Out fits up to a 35″ Tire.
  • Includes a license plate mount kit with light.
  • Retains camera functionality.
  • Single (2 Gallon Rotopax) can be mounted flat on the swing arm without use of our mount.
  • Maxtrax brand mounting pins recommended / RotoPax brand mount not included & required to use with our mount.
  • Our Rotopax/Maxtrax Combo Mount is ideal for stacking up to 2, 4 Gallon Rotopax and 4 Maxtrax stacked while maintaining space for our vertical Hi-Lift Mount.
  • All of our mounts can be adjusted vertically on our swing arms according to preference.
  • On Half Swing Bumper: Tire mount must be removed to bolt on other accessories.
  • Base bumper with no swing outs weighs 160lbs, with half swing the bumper weighs 200lbs, and with single or dual swing the bumper weighs 235lbs.
  • Please Note: All rear bumpers are now made WITHOUT the slotted cutouts on the side of the bumper, the logo cut into the side of the bumper has now been updated to the new “C4” logo instead of the “C4fab” logo shown in some of these photos.
  • Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust

Fitment

  • Bumper Mounting System allows Bumper to Adjust in Every Direction to Dial in the Perfect Fitment
  • Compatible with C4 Summit Hatch Ladder and the GOBI ladder (Non-TRD Pro Version).
  • NOT Compatible with 2021+ BSM
  • NOT Compatible with Parking Sensors on some Models

Add-Ons

  • Optional Rotopax Mount
  • Optional Hi-Lift Jack Mount
  • Optional Jerry Can Holder
  • Optional Reverse Camera Mount
  • Optional Ham Antenna Bracket

Installation


Click here to download PDF Instructions


    The C4 5th Gen 4Runner Overland Series Rear Bumper is a full replacement, no-cut design for your 2010-2024 4Runner. It includes a license plate mount kit with light, all necessary hardware, and retains the camera functionality. Each swing out variation comes with a camp table, holes for CB antennas, and zip tie tabs for easy routing of wires.

    Built with internal bracing throughout the main structure, the bumper resists twist and sag, even with fully loaded swing-outs. The swing-out arms are compatible with tires up to 35” and feature multiple mounting hole patterns to accommodate a variety of off-road accessories like jerry cans, hi-lift jack, and recovery gear. Heavy-duty latching systems are easy to operate and dramatically reduce swing-arm movement, outperforming other systems on the market.

    The bumper’s mounting system allows for full adjustability in every direction, ensuring a perfect fit and even body lines. Lightweight steel filler panels attach below each taillight, eliminating gaps and completing the clean, custom look. The design is compatible with the C4 Summit hatch ladder and GOBI ladder (excluding TRD Pro GOBI).

    Shipping Details

    • Products that can ship via Ground will be shipped to physical addresses only. Ground shipping is free inside the Lower 48 United States. If a product that normally ships via Ground is purchased with a product that ships Freight, the entire order will be shipped via Freight.
    • Free shipping is only included for shipping addresses inside the Lower 48 United States (Contiguous United States) and does not apply to Alaska and Hawaii, American Samoa, Point Roberts, Micronesia, Guam, Marshall Islands, North Mariana Islands, Palau, Puerto Rico, U.S. Virgin Islands, or countries outside the USA. If shipping outside of the Lower 48 United States, prior to ordering, please email us at the email below for a shipping quote. We will reach out with an invoice for the shipping balance shortly after the order is placed.

    info@c4fabrication.com

    Read About Our Manufacturing Process

    Made in America

    Learn How It's Made