FREE SHIPPING! | All C4 Products are 100% made in the USA and built to last.

TUNDRA

TACOMA

4RUNNER

LAND CRUISER

High-Quality Lexus GX460 Front Skid Plate / 2010-2023

LEXUS GX

SHERPA RACKS

EVERYTHING ELSE

Previous | Next
Cover photo for the C4 High Clearance rear bumper for the 3rd Generation Toyota Tacoma with emphasis on the bumper and truck while the background is faded out.
Overland-equipped white Tacoma with a roof top tent and the C4 High Clearance Rear Bumper off-road in the mountians.
Low-angle view showing the structure and armor of the C4 High Clearance Rear Bumper for the Tacoma.
Rear side shot showing the incredible amount of clearance and departure angle gained with the C4 High Clearance Rear Bumper for the Toyota Tacoma.
Tan four door Tacoma with a pop-top topper and the C4 High Clearance Rear Bumper.
Tan Tacoma with full overland accessories sitting in a desert valley with mountains in the background.
Side view of the C4 Overland High Clearance rear bumper with tire swing out on a Toyota Tacoma.
Tan Tacoma with pop-top topper and C4 rear swing-out bumper.
Tan Tacoma showing off the swing-out bumper system from C4 Fabrication.
Extreme low angle view of the C4 Overland High Clearance rear bumper with spare tire swing out.
Rear view of the C4 Overland High Clearance bumper installed on a tan 3rd Gen Tacoma.
Close-up view of the hinge on the C4 rear bumper spare tire swing-out.
Black Tacoma with the C4 swing-out high clearance bumper.
Rear view of the C4 swing-out high clearance bumper with spare tire carrier.
Close up of the hinge side of the C4 swing-out bumper.
Quartering rear view of the C4 Overland High Clearance Rear Bumper with spare tire swingout, high lift jack mount and more.
Wider view of a black Tacoma with the C4 high clearance bumper with spare tire swingout.
Close-up view of the latch side of the C4 high clearance rear bumper with tire swing out installed on a black Tacoma.
View of the included fold-down table on the C4 tire swing out.
Close-up view of the rebuildable hinge on the C4 swing out bumper.
View showing the height of the C4 swing out table and how it corresponds to the height of the tailgate on the Toyota Tacoma.
Close-up view of the delrin pads and high-strength latch used to secure the C4 swing out arm to the bumper and eliminate rattles.
Wider view showing the fold-down table on the C4 swing-out bumper and how it corresponds to the height of the tailgate when folded down.
View showing the C4 swing out extended and the gas-assist shock hidden underneath.
View of the integrated table folded up and stowed on the C4 rear swing-out.
Close-up view of the C4 swing out latch fully closed and locked.
View of the inside of the C4 rear bumper swing out with the integrated table deployed.
Close-up view showing how tight the swing-out arm sits to the tailgate on the C4 Overland High Clearance rear bumper.
High-angle view showing the C4 swing-out deployed with the accessory table down and tailgate open.
Close-up of the rear camera relocation kit for the Tacoma installed on a C4 rear bumper with swing-out.
Look down the side of the C4 Overland High Clearance bumper showing the steel protection its wings give to the back bed sides.
Close-up of the latch catch and beveled seats that ensure that the C4 swing out doesn't rattle or vibrate.
View of the top edge of the C4 swing out showing the robust structure.
Tacoma sticking its tail in the air crossing an obstacle in the mountains, shwoing off the steel structure of the C4 Overland High Clearance rear bumper with spare tire swing-out and accessory mounts installed.
Cover photo for the C4 High Clearance rear bumper for the 3rd Generation Toyota Tacoma with emphasis on the bumper and truck while the background is faded out.
Overland-equipped white Tacoma with a roof top tent and the C4 High Clearance Rear Bumper off-road in the mountians.
Low-angle view showing the structure and armor of the C4 High Clearance Rear Bumper for the Tacoma.
Rear side shot showing the incredible amount of clearance and departure angle gained with the C4 High Clearance Rear Bumper for the Toyota Tacoma.
Tan four door Tacoma with a pop-top topper and the C4 High Clearance Rear Bumper.
Tan Tacoma with full overland accessories sitting in a desert valley with mountains in the background.
Side view of the C4 Overland High Clearance rear bumper with tire swing out on a Toyota Tacoma.
Tan Tacoma with pop-top topper and C4 rear swing-out bumper.
Tan Tacoma showing off the swing-out bumper system from C4 Fabrication.
Extreme low angle view of the C4 Overland High Clearance rear bumper with spare tire swing out.
Rear view of the C4 Overland High Clearance bumper installed on a tan 3rd Gen Tacoma.
Close-up view of the hinge on the C4 rear bumper spare tire swing-out.
Black Tacoma with the C4 swing-out high clearance bumper.
Rear view of the C4 swing-out high clearance bumper with spare tire carrier.
Close up of the hinge side of the C4 swing-out bumper.
Quartering rear view of the C4 Overland High Clearance Rear Bumper with spare tire swingout, high lift jack mount and more.
Wider view of a black Tacoma with the C4 high clearance bumper with spare tire swingout.
Close-up view of the latch side of the C4 high clearance rear bumper with tire swing out installed on a black Tacoma.
View of the included fold-down table on the C4 tire swing out.
Close-up view of the rebuildable hinge on the C4 swing out bumper.
View showing the height of the C4 swing out table and how it corresponds to the height of the tailgate on the Toyota Tacoma.
Close-up view of the delrin pads and high-strength latch used to secure the C4 swing out arm to the bumper and eliminate rattles.
Wider view showing the fold-down table on the C4 swing-out bumper and how it corresponds to the height of the tailgate when folded down.
View of the integrated table folded up and stowed on the C4 rear swing-out.
Close-up view of the C4 swing out latch fully closed and locked.
View of the inside of the C4 rear bumper swing out with the integrated table deployed.
Close-up view showing how tight the swing-out arm sits to the tailgate on the C4 Overland High Clearance rear bumper.
High-angle view showing the C4 swing-out deployed with the accessory table down and tailgate open.
Close-up of the rear camera relocation kit for the Tacoma installed on a C4 rear bumper with swing-out.
Look down the side of the C4 Overland High Clearance bumper showing the steel protection its wings give to the back bed sides.
Close-up of the latch catch and beveled seats that ensure that the C4 swing out doesn't rattle or vibrate.
View of the top edge of the C4 swing out showing the robust structure.
Tacoma sticking its tail in the air crossing an obstacle in the mountains, shwoing off the steel structure of the C4 Overland High Clearance rear bumper with spare tire swing-out and accessory mounts installed.

C4 Fabrication

Tacoma Overland Series High Clearance Rear Bumper / 3rd Gen / 2016-2023

1200-4316-HC-NS

$2,399.00

Finish:

*NOTE: Ships as bare steel. Product will need to be painted or powder coated to prevent rusting.

Swing Arm:
Side Tubing:

Product Details

  • 8-10 Week Lead Time.

    Fitment:

    • This bumper requires cutting of the side panels 

    • Professional installation is recommended but not required. 

    • Aftermarket rear suspension/lift recommended but not required.

    • Blind spot monitoring system is not supported with this bumper.

    • Lower portion of bedsides behind rear fenders need to be cut off for Hi-Clearance bumper to fit onto the vehicle.

    Features:

    • 3/4” thick D-ring tabs fully welded front and back come standard

    • Swingout gear mount for spare tire and other gear

    • Comes standard with hidden hitch.

    • License plate flips up for access to receiver hitch and trailer wiring connection.

    • License plate light included

    • Weight: 150lbs without swing arm, 250lbs with swing arm and accessories.

    • Unless you choose our powder coated option, this product will need to be painted or powder coated before installation to prevent rust.

    Add-Ons:

    • Reverse light cutouts are designed to fit Baja Designs S2 flush mount, Rigid SR-M 2×3 flush mount or Extreme LED 2×3 flush mount

    • Jerry can carrier is designed to fit multiple brands of cans including Midwest, Scepter, NATO, and some jerry can shaped storage containers.

    Upgrade your 3rd Gen Tacoma (2016–2023) with the Overland Series High Clearance Rear Bumper, designed for serious off-road performance and rugged utility. This high-clearance bumper delivers improved departure angles by requiring trimming of the side panels and removal of the lower bedsides behind the rear fenders. While professional installation is recommended, it's not required, making this a solid option forexperiencedDIYers looking to tackle a more advanced install.

    Built tough, the bumper features 3/4” thick D-ring tabs fully welded front and back, and includes a hidden hitch tucked behind a flip-up license plate mount for clean access to the receiver and trailer wiring. It’s equipped with cutouts for flush mount reverse lights compatible with Baja Designs S2, Rigid SR-M, or Extreme LED units, and includes a license plate light for complete street readiness. The bumper is not compatible with the Tacoma’s blind spot monitoring system, and although aftermarket rear suspension is recommended for optimal performance, it’s not required.

    Weighing 150 lbs without the swing arm and 250 lbs fully equipped, this bumper is ready for adventure. The optional jerry can carrier accommodates multiple can styles including Midwest, Scepter, NATO, and similar jerry-shaped storage containers. Rugged, versatile, and trail-proven, this bumper is built to handle the extremes.

You may also like

100% Made In The USA

Quality Guarantee

Quick Turnaround

Affordable Pricing

Search